Power Supply: Solar + AAA rechargeable battery x 6 (not included) - Protect property from unwanted dogs, cats, birds, and small wildlife - Bluetooth and App compatible: control device with smartphone - Best places to use this unit is directly under the sun in the garden, greenhouse, farm etc.

This product does not include any chemical substances. The product repels animals and insects through use of physics principles. This product is equipped with infrared sensor, with wide extended detection range. When animals appear, high-tech circuits can produce preset sonic or ultrasonic to repel the identified target. When activated, the product, other than producing sounds, will also produce strong flashes to enhance the repelling effects

High sensitivity PIR infrared sensor detects whether there are wild animals approaching, with maximum sensing distance of 15 meters. When target appears, sonic or ultrasonic and high-intensity flash(PIR Mode) is activated Ultrasonic transmitter : produce ultra-high sound pressure sound waves or ultrasound waves. Continuous for 10 seconds LED : High-intensity flash (PIR Mode) Monitor : Shows various status Frequency Switch : Adjusts frequency Day/Night Switch : Adjusts day/night settings Battery Check : Shows remaining power Fixed Casing : Connector to sleeve (the place put in the Fixed Sleeve) Fixed Sleeve: Connector between Fixed Casing and Pole holder. Two ways to connect: put Pole holder in the Fixed Sleeve or use rope to band Pole holder and Fixed Sleeve together. Rechargeable Battery (not include) : 6 AAA battery, each capacity of 1000mA / Hr up

Frequency Range Details

This product has frequency range of 2000-32,000Hz, with 8 separate levels

1-2000 ~ 4000Hz Bullfrog / Tree Frog / Chicken / Fish / Mosquito

2- 4000 ~ 6000Hz Fly / Bird / Mountain Pig / Pig

3- 6000 ~ 8000Hz Cockatiel / Parakeet / Canary

4- 8000 ~ 10000Hz Elephant

5- 10000 ~ 14000Hz Deer / sheep / Horses / Cow / Owl

6- 14000 ~ 18000Hz Monkey / Rat

7- 18000 ~ 24000Hz Dog / Cat / Insect / Chinchilla

8- 24000 ~ 32000Hz Rabbit / Hedgehog / Raccoon / Ferret / Bat

SUGGEST USE

1-Press the frequency switch to adjust the desired frequency level or refer to the APP for the same function. The monitor will show the updated frequency level.

2-Press the day/night switch to adjust different modes. Press again to select a different mode, with the pattern all day-night-day, or refer to the APP for the same function. The monitor will show the updated mode with “Y” as night, “o” as day, and “F” as all day.

3-Press the battery switch to check the remaining power or refer to the APP to indicate the remaining power. The monitor will show the remaining power when requested.

Low Voltage Warning: When is the battery is low, the product will beep every 3 minutes, as an indicator.

When the product is activated with low battery, the transmitter will only operate for 5 seconds instead of 10 seconds to conserve power.

The APP can indicate the number of times PIR is activate, this data will be used for reference when changing the location of the product

The APP can indicate the time to change battery (After about 50,000 ultrasonic transmission)

The APP can turn the timer ON/OFF or serve as a remote control

The APP can change between PIR mode or automatic mode (activate every 5 minutes

The APP can set personal password to prevent others from controlling the product using similar devices

The APP can take pictures and memorize the product’s current location for memory management

 The APP can name the device for better memory management

Under PIR mode, when activated, the LED will flash to enhance repelling effects. Frequency Range Details S